1.Introduction of the Handheld LCD Display LQ035Q7DH06
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor), named AD-TFT (Advanced TFT). It is practicable in both transmissive-type and reflectiontype modes. It is composed of a color TFT-LCD panel, driver ICs, an FPC, a back light, a touch panel and a back sealed casing. It isn’t composed control circuit. Graphics and texts can be displayed on a 240×3×320 dots panel with 262,144 colors by supplying. Optimum view angle is 6 o’clock. An inverted display mode is selective in the vertical or the horizontal direction.
The devices in this publication are designed for use in general electronic equipment designs, such as:
Personal computers ・Office automation ・Telecommunication equipment
Test and measurement equipment ・Industrial control
Audio visual and multimedia equipment ・Consumer electronics
2.Specification of the Handheld LCD Display LQ035Q7DH06
Panel Brand: |
SHARP |
Panel Model: |
LQ035Q7DH06 |
Panel Type: |
LCM , a-Si TFT-LCD |
Panel Size: |
3.5 inch |
Resolution: |
240x320 , QVGA |
Display Mode: |
TN , Normally White , Transflective |
Active Area: |
53.64x71.52 mm |
Outline: |
65x86.2x4.2 mm |
Surface: |
Anti-glare |
Brightness: |
225nits |
Viewing Angle: |
40/40/40/50 |
Lamp Type: |
6S1P WLED , No Driver |
Signal Interface: |
Parallel RGB (1ch , 6-bit) , FPC , 50 pins |
Input Voltage: |
5.0/3.3/15.0/-10.0V (Typ.) |
Application: |
Handheld Product / PDA / PDAs |
3.Detail of the 3.5" LCD Panel LQ035Q7DH06
4.Why purchase from Hongkong Chance Technology CO., LTD?
Merchandise safekeeping: Planned and organized storage space for safekeeping of your merchandise.
Quality Thresholds: Precise standard operation procedure (SOP) that ensures the quality of your merchandise.
Safe transportation: Fast and safe transportation that ensures safety of your merchandise.
Technology advancement: Professional field applicatoin engineers (FAE) act as your exclusive technical consultant.
5.Cautions for handling the 3.5" LCD Panel LQ035Q7DH06
5.1Insertion and taking out of FPCs Be sure insert and take out of the FPC into the connector of the set after turning off the power supply on the set side.
5.2The FPC for LCD panel shall be bent only slit portion. The bending slit shall be bent uniformly on the whole slit portion with bending radius larger than 0.6mm ,and only inner side (back side of the module). Don’t bend it outer side (display surface side).Don’t give the FPCs too large force, for example, hanging the module with holding FPC.
5.3On mounting the module, be sure to fix the module on the same plane. Taking care not to warp or twist the module.
6.How we do business
7.Quality Assurance of Display Panel
If you're looking for the sharp lq035q7dh06 handheld lcd display lq035q7dh06 3.5" lcd panel lq035q7dh06, welcome to check datasheet with us. As one of the professional China suppliers in this field, we will also offer you the PDF display. Now, please be free to buy the quality products in stock with reasonable price from us.